The Ernie Express Quilt #2

It’s been almost four months since I posted the first Ernie Express Quilt at the end of April but it seems like it was just last month. I’ve been dropping my buzz phrase for this summer’s posts of “Freakishly Fast” or “Jiffy” and thats what August has been. There are several reasons why I wanted to finish EE#2 (Ernie Express #2); 1.) these fabrics sing Summer and it wouldn’t have the same impact if I were to post this in the Fall or early Winter), 2.) joining the Linky Party for Kathleen McMusings” Tips and Tutorials on the 22nd which my first tip for this post is to be careful what you post because it may taunt you in the future, and 3.) I’ll explain later in this post and is the best reason why EE#2 needed to be a Finally Finish.

In my Ernie Express (EE#1) post, I mentioned that I wasn’t loving this quilt at first which may have been due to using four different fabrics on one of the blocks. I also mentioned that if I were to make another one of these quilts, I would only use two fabrics for each block and I would use my collection of Allison Glass fabrics purchased this year. Also, I mentioned that if I did make another quilt, I would write instructions on how to make these blocks faster and easier than the way I made them for EE#1. In another post afterwards, I posted a set of the two blocks which were going to be used for the EE#2 quilt and I said I would do a “sort of tutorial” which is how Kathleen hooked me into joining her Linky Party this month. Tip #2-always use the word “instructions” and not “tutorial”—way less pressure. I apologize if my tutorial is not as detailed as other tutorials you may have seen and may seem short and quick like a member of a younger generation explaining to you on how to use a TV remote or showing you something on the computer.

Before I give you the instructions for Blocks A & B, the layout for EE#2 is different than EE#1 which I alternated Blocks A & B for each horizontal row. I did this because I didn’t like the look of the four patches or checkerboards in Block A running up and down the quilt which is the reason why I came up with Block B as an alternate block. Well, surprise, surprise, after seeing something similar on Pinterest, I decided I did like this look after all. However, I did alternate vertical rows of Blocks A & B as you can see above.

The decision to use the Allison Glass fabrics for EE#2 was perfect because I had just the right amount and variety for the blocks. I have a bundle of fat eights of 16 prints each of the wovens and cross stitch to make the sixteen Blocks A and twelve fat quarters of Sun Print 2021 to make the twelve Block B. Both of these blocks use only two different fabrics and contrast can be made either by color or the type of print, ie., geometric, floral, etc.

It is important to note these following points:

• After choosing your two fabrics for each block, decide and remember which fabrics are going to be your #1 and #2
• For Block A, Fabric #1 was a woven and #2 was a cross stitch print
• For Block B in which prints were used, Fabric #1 was the darker of the two prints
• Press all seams according to the direction of the arrows and be sure Fabric #1 in both blocks is always on the top, left corner. If the blocks are pressed correctly, all the seams will nestle, whether the blocks are arranged like EE#2 or like EE#1
• Instructions are for either fat quarters or fat eights with 21” of useable fabric (no selvedge)
• All seams are 1/4”
• I am not affiliated with any of the products mentioned or featured in this post
• These blocks really are fun to make

Block A (these directions make only one block)

From each fat eighth or fat quarter combination, cut:

• (1) 4.5” x wofe/fq strip
• (1) 2.5” x wofe/fq strip

Arrange and sew according to the above photo and press seams up or towards Fabric #1

After the strip set is sewn, cut (8) 2.5” segments and arrange them by flipping the even rows as shown in the photo above.

After all the segments have been sewn together, first two segments together, then four and then the final two segments, press all row seams going up. This block should measure 12.5” x 16.5”.

(If  you want to make two of the same blocks, then you will need a fat quarter and cut twice the number of strips)

Block B (This will make two blocks)

From each fat quarter (fat eighths are not enough) combination, cut:

• (1) 4.5” x wofq strip
• (4) 2.5” x wofq strips

Sew two strip sets as shown above and pressed according to the direction of the arrows. Cut  (8) 2.5” segments from each strip set.

Arrange segments as shown, to make two blocks and  remembering Fabric #1 on the left corner should be the first row.

After all the segments for each blocks are sewn together, like Block A, press all row seams down.

BTW, cutting the 2.5”segments using my Creative Grid Stripology XL ruler was very helpful especially placing arrows at the 2.5” marks. It helped making these blocks go/sew fast.

And this is where the instructions or sort-of tutorial ends because depending on the layout you want will reflect the number of Block A and Block B are needed. For EE#2, I made fifteen Block A and ten Block B to make a 60”x80” quilt which is a generous lap size quilt. For EE#1, with alternating blocks on each row, I made thirteen Block A and twelve Block B, also the same size as EE#2.

These blocks sew fast-Freakishly Fast. As mentioned before, the seams will nestle no matter which layout you chose, even if you just make Block A or B-just be sure to follow the pressing arrows. I started cutting and sewing the blocks on Friday evening, all twenty-five blocks were sewn on Saturday, quilted on Sunday and bound and finish this past Monday. When I first started sewing the blocks, I would cut and sew only one at a time and gradually as I got into a rhythm, I would make cut and sew three or four at a time.

Another Tip, it never hurts to make extra blocks. I made sixteen Block A and only needed fifteen and made twelve Block B and only needed ten. It turned out these blocks were going to be rejects because the yellow Block A looked faded compared to the other blocks and the two Block B also looked wrong with the other blocks. Plus, these two blocks were the only ones that I had problems with the seams matching which I think Quilt Karma was making sure they didn’t make it in EE#2 because they would have stuck out like a sore thumb. 

And here are some deets on the finishing of EE#2:

• I did not follow my tip of buying yardage for binding whenever precut bundles are purchased. I feel sort of bad or being unfaithful by using yardage of a multi-color Timeless Treasure print called Day Dreaming which had the same colors as the Alison Glass fabrics. I thought of ordering yardage of one of the Woven print but then again I needed this quilt to be finished now and not later.
• As a way of justifying the binding used, I did use another fabric line, Whistler Studio 108” backing print called Medallion for the back.
• I machine quilted straight horizontal and vertical lines with two different #50wt Aurifil threads; #2105 Light Yellow for the top which blended well with all of the different colors and glad I didn’t used the variegated which would have added more color which EE#2 didn’t need and a Dark Gray for the bottom which I also liked how it blended with the colorful backing.
• My quilting stitches looked more nice and even than usual and I attributed it to quilting slower and not as quick as when I piece. You may already know this but this is the first time I should have realized this.

My last tip for this post is after sewing the binding down the first time, I had a lot of threads to trim before finally sewing the binding down the second time. I used a Clover Clip to mark where I started the clean up because there have been times I may have gone around one and a half times doing this.

And now for the final and best reason as to why Ernie Express #2 needed to be a Finally Finish before leaving for our road trip at the end of the week. It’s because we’re going to be stopping by to see Ernie, the American Farm Tiger who resides at the house where Mary Etherington, Country Threads also happens to live for a quick visit. I wanted Ernie, the Quilt Muse for all of the Ernie Quilts made in his name to bless my EE#2 quilt. As long as I bring him treats, he will bless anything. I wanted to include a photo of him sitting on EE#2 in this post but since we’re traveling and sometimes the WiFi is iffy, I rather post now than later. I’ll be sure to post a photo on Instagram and maybe a sort of sneak peek of my secret sewing project which would look good hanging in Mary’s garden.

I think Ernie Express #2 is a fitting quilt to end the month of August. I apologize for some of the graphics/photos in this post, I’ve just become reacquainted with PicMonkey and it’s a little different using it on an IPad versus my Mac computer. And if you’re reading this post from Kathleen’s Linky Party, I hope my instructions/sort-of tutorial was understandable and enough tips were shared so you don’t think I’m being a party crasher.

Linking up with: Tips and Tutorials on the 22nd and My Quilt Infatuation/NTT

Innocent Crush Patchwork Throw

My Innocent Crush Patchwork Throw is my August finish for the Country Threads Dirty Dozen UFO Challenge. Like my July Finish, my August UFO was finished early and involved HSTs waiting to be assembled into a quilt. I knew once I decided on a layout for the blocks, I wanted this to be a quick and easy finish, so the plan was to make it a Patchwork Throw by only adding a plush backing and no batting.

This Patchwork Throw has been in the makings for over ten years when the Innocent Crush fabrics designed by Anna Maria Horner was released in 2010. I purchased a Fat Quarter Shop Designer Bundle of twelve fat quarters along with a yard cut of the red Mixed Signal print which came in handy once I decided on the layout. Whenever I purchase pre-cuts, I always try to remember to buy yardage of one of the prints for binding.  Since this project was started before I began blogging and using an iPhone to record my quilting activity, the best I can remember is the HSTs were probably made after the fat quarter bundle was sitting around for at least five years and I decided to use these mostly large prints for HSTs after I purchased an 8” HST die. To the best of my recollection and forgetting to look through my old quilt planners to verify the dates, these HSTs were made at least five years ago and the last time I looked at these HSTs was almost four years ago. Along with the twelve fat quarters from the bundle, I also cut a fat quarter from the red Mixed Signal print since it was not included in the bundle so fifty-six HSTs were sewn. I only needed fifty-four for the top.

When I started working with the HSTs, I couldn’t remember the name of the fabric collection and spent some time online searching the many Anna Maria Horner fabric lines to determine which one it was and of course had I looked at the yard cut of fabric I had, the name was was on the selvedge. (And then again I could have also found it had I look through my old planners.) This lovely group of fabrics has lovely shades of teal, lavender, pinks, blue and rusty reds so I decided to make flying geese blocks with the boldest colors which were mostly reds and blues for the points. These blocks measure 8”x16” (finished).

When I first started laying out the flying geese blocks point side down on my design board, my initial plan was not to match the sides but decided I liked the look of the flying geese blocks linking although some of the same prints are too close together for my liking. When the blocks were originally laid out with the points down, I thought of naming the quilt Half Hearted but decided I like the layout better with the points up. The remaining yardage of the red Mixed Signal print which I intended for the binding was used instead to add a four-inch pieced border on the sides so the top would measure 56”x72”.

Since my plan was to make a Patchwork Throw, the layout wasn’t too important and not so noticeable because once the plush backing was added,  it would look nice scrunched up on a chair or sofa. My favorite plush Chenille backing was used along with a black and gray mini check for the binding.

My first Patchwork Throw was made around five years ago when I wanted to make a quick quilt for my Godmother who had knee surgery from an accident and was going to be recovering in a convalescence home. I had HSTs already made with Amy Butler fabric, which were made the same time as the Innocent Crush HSTs, and some apple green Minky. It turned out great. The lessons I learned with this throw is to use sewing machine needles for knits, ball points, polyester thread and baste well. Also, you only need to do simple quilting since there is no batting in between and I find when I do too much quilting, it makes the throw too puffy. This is the only Patchwork Throw I’ve self bind with the Minky and I am wondering why I decided to start binding them. BTW, I made quite a few of these Amy Butler HSTs and have enough left to make another Patchwork Throw which I added to this year’s Dirty Dozen UFO Challenge so you may see it sooner or later.

Patchwork Throws really are quick and easy to make, especially if you already have a flimsy made. We’re in the midst of a heat wave as well as other parts of this U.S. so I’m thinking in around sixty days, my Innocent Crush Patchwork Throw will be very much appreciated and snug worthy. I’m hoping I will be able to see my friend by then so I can give her this very belated gift.

And speaking of gifts, this quilt formerly known as the Jolly Jinny Jungle Quilt has now been renamed as the Wetland Quilt and given to my favorite nephew, Jim, in celebration of his recent marriage and his new position as the Director of the James Kennedy Waterfowl and Wetlands Conservation Center in South Carolina. I’m so glad I had just the right quilt to give him and although I miss it, I can always make another quilt with these fabrics since I still have some leftover fabrics and blocks.

Before I end this post, I thought a share a peek of the secret sewing I’m doing in preparation of an upcoming Blog Hop in September for a new quilt publication to be released on August 23rd which is absolutely wonderful. More details and peeks to follow.

I’m glad my August commitment  is finished because the rest of the month we will be busy traveling to and from the Grandparent House and looking forward to an upcoming road trip to Colorado. Hoping to stay healthy and for you too, as well as having an Awesome August.

Linking up with: My Quilt Infatuation/NTT

 

Jiffy July

I thought the end of my freakishly fast July would be these two quilts but decided that I could do one more Finally Finish with my Flour Garden Table Runner.

All three of these were 2020 Flimsies and also happen to be the last of the quilts in which the color Citronickle makes an appearance. I also decided to switch calling this month Jiffy instead of Freakishly Fast because I like the alliteration of Jiffy July. Here are some deets of each of these Finally Finishes:

Kiwi and Mango Tango (KMT) Slinky

If the prints in this quilt look a little familiar, it’s because I made this from the leftover strips and squares from the Kiwi and Mango Tango Bundle Buster quilt made in 2019. 

The Kiwi and Mango Tango Bundle Buster Quilt was given to the darling Granddaughter’s parents and I always wanted to make a quilt for myself from the scraps.

Usually, only squares are used in “Slinky” quilts but since I had some strips leftover, I didn’t want to cut them into squares which would result in some waste. Plus, some of these strips were my favorite prints of Pam Goecke Dinnorf’s Figment Fabrics. I think the Charcoal Aged Muslin setting strips by Marcus Brothers accents these fabrics nicely.

I machine quilted with a combination of straight and wavey lines in an Essential Thread in Charcoal Gray on the top with a variegated Gray thread in the bottom which I thought would go well with the fun backing fabric. The binding is the same Charcoal Gray fabric used in the top which makes it look like I faced the quilt. KMT Slinky measures 55” x 75”.

Ernie a Go Go (previously named Urban Ernie)

I thought the name Ernie a GoGo fit better with the colorful VeloCity fabric line by Jessica Hogarth, P&B Textile since the focal prints has a few things with wheels that say “Go”. 

I can’t remember the idea behind this quilt which the rail blocks of various widths were paired with plain patches of the focal print and black and white rails which sort of remind me of prison stripes and jokingly thought of renaming this quilt Ernie Goes to Prison. Additional fabrics used in this quilt were from Art Gallery and Cotton+Steel.

My favorite way to machine quilt the “Ernie” Quilts is to combine straight lines with wavey lines and I used Charcoal Gray Essential Thread. The backing is the splatter print which I purchased a bolt of just for backing the modern quilts and it complements this top well. For some reason, I did not set aside any fabric for binding and spent some time hunting the stash to find a print which went with the other other fabrics. I chose a Jackie Shapiro black and white stripe. This quilt measures 56”x72”.

After Ernie a GoGo was a Finally Finish, I thought a photograph with Banana the Bike would be fun so I asked the Master Quilt Holder to take it down from the rafter in the garage. 

I thought I would include a collage of the Master Quilt Holder who thought I should take Banana for a spin but I rather use her as a quilt prop for just the right quilt. Banana has been gathering dust hanging in the garage for the past several years as you can see from the dusty Swifter that’s stuck in the Master Quilt Holder’s back pocket and laying on top of the back seat; sort of looks like a bunny tail, doesn’t it?

Flour Garden Table Runner

If I haven’t already plan for this quilt to be a table runner, it would make a nice bench seat cover, wouldn’t it? I just love the happy color combination of teals, grays, navy and Citronickle.

I mentioned in a previous post that I seem to like collecting the fabrics received in the Fat Quarter Shop’s Sew Sampler box but here is a rare instance when I was perusing through an old quilt magazine and I was inspired to make a log cabin table runner with Linzee McCray’s Flour Garden Honey Bun Mini Roll. I added additional prints from other fabric lines for more variety.

Simple diagonal quilting with Aurifil #2920 thread on top and smoke gray on the bottom went easy-Thank you Hera Marker. Binding was, no surprise, the Citronickle Kimberly Kight print. This table runner measures 24”x48”.

Just two more days left for the month of Jiffy July and I think five Finally Finishes makes it a pretty productive month. I’m going to spend the last days starting on some secret sewing and I’m going to be slab happy. I’m looking forward to an Awesome August which may not involve a lot of quilting since we will be traveling and Hubby with his band, The Fossil Tonez have several gigs planned.

Linking up with: My Quilt Infatuation, NTT

Citronickle Canyon

I’m having a good string of Finally Finishes since the beginning of June and my Citronickle Canyon Quilt is the tenth one in seven weeks. So far this year, it’s my twentieth Finally Finish and my sweet sixteen UFO-I guess almost weekly travels to the Grandparent House helps me to stay on task. The Citronickle Canyon was an UFO from last year and finished in March around the start of the lockdowns. I thought I share the idea behind this quilt and the influences of good quilt friend Wendy/Pieceful Thoughts.

If you read any of my past posts, you will remember that Citronickle is the name Wendy came up for the yellow green color which is a combination of Kona’s Pickle, a beloved color, and my liking to call any yellow green Citron. You can see in the quilt that Citronickle makes an appearance. The Canyon portion of the name is from Violet Craft’s Palm Canyon fabric line which Wendy and I both received a mini roll of 20 strips in a Fat Quarter Shop Sew Sampler Box. I can’t recall the conversation which transpired between us that prompted her to send me the remaining strips she had left after making a lovely bag with her roll of Palm Canyon. It wouldn’t surprise me if I had mentioned that I very rarely use any of the fabrics included in the Sew Sampler Boxes which I’ve been receiving these since the beginning of this wonderful program and, yes, I have a wonderful collection. In order to make this quilt I needed to buy some fat quarters and yardage of the focal print of Palm Canyon plus I added some Michelle d’Amore Contempo prints which I purchased during a Colorado vacation in 2018 along with (not shown) a Art Gallery print and a gray and white Pick up Sticks print which I purchased after seeing this in some of Wendy’s quilts.

The pattern is a variation of my Staggered Strips and Squares Quilt Pattern and the Big Cat Crossing Quilt  shows larger patches of a focal print and vertical rail blocks used in this quilt.

The Citronickle Quilt is made up of 8”x16” patches of the focal print, 8” rail blocks set vertically and various sizes of strips sets made of 2.5” strips and 4”x8” rectangles. One difference with the strips is that some of them were sewn with diagonal seams to complement some of the angular prints.

Here’s a close-up showing the focal print which shows the wind turbines with the rail blocks and strip sets and you can see the all of the fabrics I mentioned above. I like to mention I really love the focal print and it was hard for me to cut which is why these patches were 8” x 16”.

Upon my return home last week from the Grandparent House and with a few days in between before we left again, Citronickle Canyon was quilted with diagonal straight line quilting 1” apart and some spots a little wonky which I thought would work  since this quilt seem to have an angular look. I quilted it with a 50wt Silver Aurifil thread and the binding is the gray and white Pick up Stick print dutifully saved in the binding drawer. The quilt measures 56”x72”. I forgot to take a photo of the backing which you can see on the left side of the fabric photo above. I mentioned this print in my June Unexpectations Post as it was the backing used for the Zingy Zebra baby quilt.

Here’s another photo of the Citronickle Canyon hanging around the fence at the Grandparent House. It’s too bad there are no canyons around.

Last of all, I want to mention that I’ve finally switched to Follow.it after reading so many posts from other bloggers who recommended this as a way to advise followers when I publish a blog post. At first I was hesitant and stubborn about making the switch but I really like this site not only for announcing new posts from me but also for reading other posts from my blog buddies, the news and other points of interests. I’m still learning how to navigate this site but so far no problems and I can’t say enough about their customer service. It’s so nice to communicate with a person in real time and am so thankful they converted my subscriber list. It was so easy and I am amazed that I was able to do this. Thanks Suz, Janine, Nancy and Sandra for writing such great posts about this new service and helping the poster child for being technically challenged on Blogging to finally go with the flow.

Last night after returning from the Grandparent House and enjoying the start of a six-day hiatus from the darling granddaughter and before I started quilting another 2020 UFO, I thought I “treat” myself by playing with the Alison Glass fabrics I been accumulating/purchasing lately. I decided that I am going to make another Ernie Express Quilt but only using two fabrics instead of four fabrics in each block. This is the start of something fun and will be doing a “somewhat” tutorial on the making of these blocks. They do sew fast or as I am saying during the month of July “freakishly fast.”

If you’re looking for inspiration or need something to get your sewjo sewing, check out to see what Wendy is doing. You might see some Citronickle.

Linking up with:My Quilt Infatuation\NTT